NEWS — AAMA
Category [ all | aama | green | industry | legislative updates | materials | products | southeast region | website quick tips | western region ]May 15, 2012
BIM: An Accelerating Game Changer
"Building Information Modeling will change everything," said Dennis Neeley (SmartBIM), noting that "the change is becoming very evident [and] is happening at unprecedented speed." During his presentation at the AAMA Western Region 2012 Spring Meeting (April 10-11), Neeley shared his analysis of the rapidly evolving acceptance and use of BIM.May 15, 2012
The U.S. Economic Outlook
During the AAMA Western Region 2012 Spring Meeting, Dr. Esmael Adibi, Director of the A. Gary Anderson Center for Economic Research and Anderson Chair of Economic Analysis at Chapman University, provided an update on the U.S. economic outlook.May 2, 2012
AAMA Revises Field Testing Requirements for Newly Installed Fenestration Products
AAMA 502-12, Voluntary Specification for Field Testing of Newly Installed Fenestration Products has been published by the AAMA. This updated specification establishes the requirements for field test specimens, apparatus, sampling, test procedures and test reports to be used in verifying the air infiltration resistance performance and water penetration resistance performance of newly installed fenestration products.April 30, 2012
More than 20 percent of public schools reported having unsatisfactory indoor air quality, according to the U.S. Department of Education. And the U.S. Centers for Disease Control and Prevention estimate that students in America miss approximately 14 million school days per year because of asthma.
Case Study: Fiberglass Windows Featured in Environmentally-Sustainable Schools
April 27, 2012
AAMA Publishes Care and Handling Manual for Aluminum Products
AAMA CW-10-12, Care and Handling of Architectural Aluminum from Shop to Site has been published by AAMA. The document was updated from the 2004 version and covers care and handling of architectural aluminum products from mill to fabricator to job site through project completion.April 27, 2012
The regulations, entitled the 2010 ADA Standards for Accessible Design, went into effect March 15, 2012, for physical construction or alterations commencing on or after that date. Property owners across the country are now required to meet these expanded regulations for renovation or construction projects or risk ADA compliance lawsuits.
AAMA Seeks Code Modification for ADA Threshold Height
On July 26, 2010, the 20th anniversary of the Americans with Disabilities Act (ADA), President Obama announced newly revised ADA regulations.The regulations, entitled the 2010 ADA Standards for Accessible Design, went into effect March 15, 2012, for physical construction or alterations commencing on or after that date. Property owners across the country are now required to meet these expanded regulations for renovation or construction projects or risk ADA compliance lawsuits.
April 27, 2012
Door Task Groups Near Completion on Industry Documents
At the 75th Annual Conference in Naples, FL, the Door Council and related task groups met to resolve ballot comments and discuss critical issues.April 25, 2012
AAMA's Fiberglass Material Council Launches New Web Page
AAMA's Fiberglass Material Council launched a new web page, developed by the FMC Marketing Committee, featuring new content and an updated page layout, as well as the addition of relevant information of interest to the fiberglass community and the fenestration industry as a whole.April 2, 2012
AAMA Encourages Education during National Window Safety Week, April 1-7
AAMA, as a partner of the Window Safety Task Force, encourages everyone to recognize the importance of practicing window safety by designating one week each spring to promoting safety and education. National Window Safety Week, April 1-7, is used as a time to remind all households that open windows can be dangerous for young children who are not properly supervised.March 30, 2012
Member Profile: WIC First Vice President, Chris Habegger
WIC First Vice President, Chris Habegger (Gaska Tape), describes some of his industry experiences and influences, as well as his involvement with AAMA, in this Member Profile.March 30, 2012
FenestrationMasters Includes Basics of Wall Interface Components and Their Installation
AAMA's new FenestrationMasters™ training program for industry professionals is targeted toward technical managers at manufacturing companies, manufacturer sales and customer service personnel, distributors, dealers and installers. Courses are configured for two training levels: FenestrationAssociate™ (provides overviews of the material), and FenestrationMasters™ (provides in-depth details). The foundation for the coursework is consensus-based AAMA standards.March 30, 2012
Website Quick Tips: Navigating MyList in Members Only
Each month, the AAMA e-News will feature Website Quick Tips that will show web users how to navigate portions of the AAMA website, including Members Only. This month's topic is the use of the "MyList" feature within the Members Only portion of the AAMA website.March 30, 2012
AAMA Launches Legislative LinkedIn Subgroup
AAMA members are now invited to join the LinkedIn subgroup, "AAMA Legislative and Regulatory Forum." This subgroup features legislative, regulatory and industry-related news and updates. Members are encouraged to start discussions, post comments and request additional information on topics of interest.March 30, 2012
Member Profile: VMC First Vice President, Kevin Seiling
VMC First Vice President, Kevin Seiling (VEKA) describes some of his industry experiences and influences, as well as his involvement with AAMA, in this Member Profile.March 29, 2012
Regulatory Affairs Committee Discusses Legislative and Industry Updates at 75th Annual Conference
At AAMA's 75th Annual Conference, Regulatory Affairs Committee members met to address EPA issues, including recommendations for the ENERGY STAR® 6.0 framework document and LRRP rule; as well as important federal legislation and industry updates.March 27, 2012
AAMA Welcomes New Member Companies
During the first quarter of 2012, four companies have joined AAMA as first-time members. We're proud to welcome these companies into our membership and invite you to learn more about them by visiting their websites.March 26, 2012
Only 48 hours after a tornado outbreak devastated parts of the South and Midwest, another storm was again closing in, and Decker's Indiana home lay right in its path. A tornado had already been spotted in the area, so Decker and her children quickly made their way to the basement.
New Window Standard Tackles Tornadoes
Stephanie Decker always knew it was her duty as a mom to protect her two children from danger, but she didn't know that a deadly storm would soon put both her and her children's lives at risk.Only 48 hours after a tornado outbreak devastated parts of the South and Midwest, another storm was again closing in, and Decker's Indiana home lay right in its path. A tornado had already been spotted in the area, so Decker and her children quickly made their way to the basement.
March 23, 2012
AAMA's Vinyl Material Council Publishes Sustainability White Paper
AAMA's Vinyl Material Council has released a new white paper on sustainability entitled Sustainable Vinyl: One material, virtually endless possibilities. The overall goals of the paper are to dispel myths and confirm truths about vinyl as a sustainable material, as well as outline the material's durability and sustainability.March 20, 2012
AAMA Requests Openness and Transparency in Regulatory Process
AAMA is recommending timely and significant government intervention to promote openness and transparency in the regulatory process by requiring early disclosure of proposed agency settlement agreements and consent decrees. AAMA recently sent a letter to Chairman Lamar Smith and Ranking Member John Conyers, Jr. of the U.S. House Judiciary Committee requesting their approval of the Sunshine for Regulatory Decrees and Settlements Act of 2012 (H.R. 3862).March 15, 2012
AAMA Scholarship Program, Partner Program Accepting Applications through April 1
The application deadline for the AAMA Scholarship Program and Partner Program is approaching. Applications will be accepted through April 1 and must be post-marked by this date in order to qualify for any of the available awards.March 14, 2012
AAMA was awarded the 2011 Fenestration Humanitarian Award by World Vision at the AAMA 75th Annual Conference held in Naples, FL, February 26-29. AAMA was honored for their investment in World Vision and commitment to make a transformational difference across the U.S.
AAMA Receives World Vision Fenestration Humanitarian Award
March 5, 2012
AAMA Provides Information for Legislation to Restore Opt-Out Provision in LRRP Regulations
The Lead Exposure Reduction Amendments Act of 2012 (S2148), introduced by Senator James Inhofe (R-OK), seeks to restore the "Opt-Out" provision removed from the Environmental Protection Agency's (EPA) Lead Renovation, Repair and Painting (LRRP) rule in April, 2010. This legislation has been directed to the Committee on Environment and Public Works (EPW), on which Inhofe presides as Ranking Minority Member.February 29, 2012
The ability to accurately test for weathering and meaningfully predict the durability of polymers and coatings intended for outdoor exposure is critical to product development and to certification. Outdoor weathering sites in Arizona, Florida and Ohio routinely expose samples to the conditions of their respective climates. But these tests take up to five years, and this can pose a problem due to today's fast-evolving technology and competitive markets.
Experts Dissect Challenges of Accelerated Weathering Alternatives during Annual Conference
February 29, 2012
AAMA Celebrates 75 Years at Annual Conference
AAMA kicked off its 75th anniversary celebration during the Opening General Session of the 2012 Annual Conference. The conference, held in Naples, FL, features many special presentations, significant task group and committee meetings and the Annual Awards Banquet.February 29, 2012
Former Navy SEAL Eric Greitens Delivers Inspiring Speech at 75th Annual Conference
Keynote speaker Eric Greitens delivered his speech, The Heart and the Fist - Inspired Leadership Through Challenging Times, during AAMA's 75th Annual Conference in Naples, FL. The speech addressed subjects vitally important to today's companies, including leadership, social responsibility and the humanitarian ethic.February 29, 2012
AAMA Task Groups Make Progress on Green Certification Program
At AAMA's 75th Annual Conference in Naples, FL, the association's green-related task groups met to discuss AAMA's Green Product Certification Program and review ballot results.February 29, 2012
AAMA Ratifies 2012 Board; Appoints Heppes as Affiliated Association Representative
At the AAMA 75th Annual Conference in Naples, FL, the AAMA membership ratified the 2012 Board of Directors slate, which included Jerry Heppes, Sr., CAE to fill the affiliated association seat formerly held by Phil James of the National Glass Association.February 29, 2012
Glass Material Council Creates Task Group to Update Two Existing Documents
At the 75th Annual Conference in Naples, FL, the Glass Material Council met to discuss critical issues.February 29, 2012
AAMA Scholarship Program, Partner Program Now Accepting Applications
The application process for the 2012-2013 AAMA Scholarship Program and Partner Program is now open. Applications will be received for both programs through April 1.February 28, 2012
AAMA Recognizes Member Leadership during 75th Anniversary Celebration
The American Architectural Manufacturers Association (AAMA) recognized the contributions and achievements of its members and congratulated award winners at the 75th Annual Conference Awards Banquet held in Naples, FL. Award presenters noted the importance of these member contributions as they serve to further the industry as a whole.February 27, 2012
Eleven members of the American Architectural Manufacturing Association (AAMA) sponsored 250 World Vision SchoolTools backpacks, at a total cost of $5,500, to benefit at-risk Florida children. Backpacks were assembled with school supplies by members' spouses as a part of AAMA's 75th Annual Conference in Naples, FL.
AAMA Members Sponsor SchoolTools Backpacks for At-Risk Children
January 30, 2012
AAMA Announces 2012 Schedule of Events; Residential Green Certification Nears Completion
American Architectural Manufacturers Association (AAMA) will host its 75th Annual Conference for fenestration industry leaders and decision makers, February 26-29, at the Naples Grande Hotel (Waldorf Astoria) in Naples, FL. The highlight of this year's event is the celebration of AAMA's 75th anniversary.January 30, 2012
Celebrating 75 Years of Evolution and Excellence
During the upcoming Annual Conference, AAMA will be celebrating its 75th anniversary. The association has grown and advanced since its inception in 1936, and we’re proud of our heritage. Therefore, we have organized a timeline to detail our historical beginnings and progress through today.January 2, 2012
AAMA Celebrates 75 Years, Opens Registration for National Conference
Registration for the AAMA 75th Annual Conference is now open. AAMA members may register online and save $50. Highlights from the upcoming event include the 75th Annual Awards Banquet, keynote speaker, green product certification, codes and regulatory affairs and alternative accelerated weathering testing.December 28, 2011
AAMA Welcomes Two Manufacturers as New Members
In the fourth quarter of 2011, two window and door manufacturers have become AAMA members. We’re proud to welcome these companies into our membership and invite you to learn more about them by visiting their websites.December 27, 2011
Top 10 AAMA News Articles of 2011
The end of each calendar year gives us a chance to reflect back on the trends and top news stories of the past year. The top AAMA news stories give a look at important events and documents, as well as other industry impacts, in 2011.December 23, 2011
Member Profile: FMC First Vice President, Robb Plagemann
FMC First Vice President, Robert (Robb) Plagemann (Tecton Products), describes some of his industry experiences and influences, as well as his involvement with AAMA, in this inaugural Member Profile.December 21, 2011
ENERGY STAR Tightens Requirements
Given the energy-saving benefits of high-performance fenestration and the positive influence it has on our industry, AAMA has joined others in urging a resumption of the tax credits that expired at the end of last year. These tax credits were, and future credits are likely to be, tied to performance levels dictated by the ENERGY STAR® program, which continues to tighten its requirements.December 20, 2011
AAMA Honorary Member Lyon Evans Passes Away
AAMA Honorary Member Lyon D. Evans of Wausau, WI, passed away on December 8, at the age of 93.December 19, 2011
Applications for AAMA Scholarship Program Open January 1, Partner Program Available
The application process for the AAMA Scholarship Program and the Partner Program opens January 1, 2012.December 6, 2011
Energy Considerations for Windows
As the global community grows, the need for energy also increases. In a recent presentation at the AAMA Southeast Region Fall Meeting, Jeff Sonne, Senior Research Engineer from the Florida Solar Energy Center, discussed the approaching peak production of oil, new and innovative energy solutions and various developments in energy considerations for the future.December 4, 2011
AAMA Praises Obama for $4 Billion in Energy Upgrades and Congress for 3% Tax Repeal for Contractors
The American Architectural Manufacturers Association (AAMA) and its members are praising President Obama’s announcement today committing nearly $4 billion in combined federal and private sector energy upgrades to buildings during the next two years. The White House states that these investments will save billions in energy costs and promote energy independence. According to independent estimates, it also will create tens of thousands of jobs in the hard-hit construction sector.November 29, 2011
WIC Solicited for Expert Advice, Requests Quotes from Labs
The Western Wall and Ceiling Contractors Association (WWCCA) asked AAMA to review selected details for window installation in stucco, and whether or not a sill pan is needed in particular instances. WWCCA is writing a guide that intends to reference AAMA; as a result, they asked the Wall Interface Council to review their guide before it is published.November 29, 2011
AAMA Requests Better Tax Incentives for Energy-efficient Fenestration Products
The American Architectural Manufacturers Association (AAMA) is recommending timely and significant government intervention to reduce severe construction industry unemployment. The association recently sent a letter to Chairman Dave Camp and members of the U.S. House of Representatives’ Committee on Ways and Means asking for effective tax incentives relating to energy-efficient fenestration products for homeowners.November 29, 2011
Cincinnati's Over-the-Rhine neighborhood is believed to be the largest, most intact urban historic district in the United States. However, many of the once beautiful historic homes that line the streets of this neighborhood have fallen into disrepair. Families in this working class neighborhood often find that repairs and energy-efficient updates are too costly.
Case Study: Vinyl Windows Contribute to LEED Certification of Historic District
November 28, 2011
American Architectural