Search for AAMA-Certified Products
Since 1962, AAMA Certification, the original third-party window performance program, has provided manufacturers with the means to independently demonstrate product performance to their customers. The program went on to raise the bar even higher by earning ANSI-accreditation in 1972 – a credential still maintained today. The AAMA Certification Label tells customers that a sample of the product has been verified as conforming to the standards’ requirements through independent laboratory testing and follow-up on-site inspection of the manufacturer’s production line. Products authorized for certification and their manufacturers are also listed in the online AAMA Certified Products Directory, the industry’s preeminent resource for window and door products.
To ensure the highest quality standards, the AAMA Certification Program is independently administered and conducted without bias. Only the AAMA Gold Label indicates all of the following:
- A sample of the product underwent testing per the performance-based, material-neutral requirements of the AAMA/WDMA/CSA 101/I.S.2/A440-08 industry standard or its predecessors
- Tests were performed at an independent AAMA-accredited testing lab and met these criteria:
- Prescribed maximum levels of air leakage through the assembly
- No water penetration through the assembly at a specified simulated wind speed
- Prescribed levels of structural resistance to wind and other dynamic pressures
- Life cycle durability requirements as applicable based on the product’s performance class designation
- Component performance verification to AAMA specifications
- An independent third-party validator, through two unannounced plant inspections each year, has continually monitored the product production for compliance and quality assurance procedures
- The manufacturer used the required certified profiles and verified components where performance standards for those particular parts and materials exist
Energy efficiency is becoming increasingly important to homeowners, builders and manufacturers. Recognizing this, AAMA offers optional certification for thermal performance and condensation resistance. In addition to Gold Label Certification, manufacturers may certify thermal performance to the AAMA 1503 test method or through AAMA to National Fenestration Rating Council (NFRC) requirements.
Manufacturers may certify their products for thermal performance with or without certifying for air, water, and structural performance. Those products certified for thermal performance only are designated with the AAMA Silver Certification Label.
Insulating Glass (IG) Certification
AAMA offers IG certification through its Gold Label administrator, Associated Labs, Inc. (ALI). This relationship brings together two powerhouses of fenestration expertise - ALI with decades of IG certification experience and AAMA with decades of fenestration product certification and standards setting experience. As of July 1, 2010, the NFRC will begin enforcing the requirement for IG certification by a listed, third-party certification program for all insulating glass units used in products that are authorized for NFRC certification and labeled in accordance with the NFRC 700, “Product Certification Program (PCP).”
ALI offers competitive fees and there are immediate cost and scheduling savings for companies who currently participate in the AAMA air-water-structural certification program. Performing simultaneous inspections for both the air-water-structural and IG programs offer significant cost savings. In order to receive NFRC certification, manufacturers will be required to use certified insulating glass units from an approved, ANSI accredited certification agency, such as ALI. The listing of the IG certification program sponsors can be found on the NFRC website.
To ensure that your NFRC certification is compliant with the new IG certification requirement, contact Brad Schultz at ALI via email or phone (214) 565-0593.
The AAMA Certification Program and its familiar Gold Label are accepted, if not required, by many federal, state and municipal building codes and administrators as an indication of product quality to builders, dealers, and building and home owners. Given the value of the AAMA Gold Label, some manufacturers have been known to use imitation labels. To protect those companies who’ve passed the required rigorous testing within its certification program quality assurance system, AAMA offers its online Certified Products Directory, which catalogs all products currently authorized for certification through the AAMA program and the companies that manufacture them.